Lathe Archives - Tech-NC https://www.tech-nc.com/product-category/full-mark/lathe/ TECH NC .CO., LTD Wed, 22 Nov 2017 07:23:33 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.8 FHK series https://www.tech-nc.com/product/fhk-series/ Wed, 02 Mar 2016 00:00:00 +0000 http://www.tech-nc.com/product/fhk-series/
  • FHK-960
  • FHK-1120
  • FHK-1220 (to 2000)

    • The post FHK series appeared first on Tech-NC.

    ]]>     Standard Accessories:
    1.Lubricating device for headstock                                                 9.Steady rest Ø16”
    2.Spindle motor 20HP                                                                     10.Face plate with 4-jaw 40”
    3.Electro-magnetic brake                                                                11.Dead center
    4.Metric/Inch gear box                                                                     12.Center Sleeve MT#6
    5.Longitudinal & Cross rapid feeding                                             13.Toolpost screw wrench
    6.Strong electric tailstock (Quill 200mm)                                       14.Level pads
    7.X,Z-axes auto lubrication system                                                15.Tool & Tool Box 8.X,Z-axes with Turcite-B

     

    SPECIFCATIONS FHK-960 FHK-1120 FHK-1220 (to 2000)
    Swing over bed 960mm 1120mm 1220mm (to 2000mm)
    Swing over cross slide 550mm 710mm 810mm (to 1590mm)
    Swing over gap 1240mm 1400mm 1500mm (to 2280mm)
    Distance between centers 2000mm | 3000mm | 4000mm 4000mm | 5000mm | 6000mm 7000mm | 8000mm
    Spindle center to floor height 1165mm 1245mm –
    Width of bed 810mm
    Width of gap 595mm (actual turning diameter changed by different chuck size)
    Length of bed 4390mm | 5390mm | 6390mm 6390mm | 7390mm | 8390mm 9390mm | 10390mm
    Spindle bore diameter Ø 152mm [ Ø230mm,Ø305mm,Ø380mm OPTION ]
    Spindle nose ASA A2-11 [ A2-15 & A2-20 OPTION ]
    Spindle speeds & steps 4 ~ 420 RPM(16 steps) 7 ~ 266 RPM (12 steps)
    Width of carriage 880mm
    Cross slide travel 700mm
    Compound rest travel 400mm
    Max. size cutting size 32 x 32mm
    Diameter of barrel Ø 200mm
    Travel of barrel 300mm
    Taper of barrel MT#6 [ MT#7 opt. ]
    Movement Body movement: electric type(motor:1/2HP)/ Quill movement: manual [ Electric type(motor:1/4HP) opt. ]
    Lead screw diameter & pitch Dia. 60mm Pitch 12mm
    Range of metric pitches 1~120mm (62 Nos)
    Range of inch pitches 0.25~30 T.P.I. (70 Nos)
    Range of diametral pitches 1-120 D.P. (70 Nos)
    Range of module pitches 0.25~30 M.P. (53 Nos)
    Feed rod diameter 32mm
    Range of longitudinal feeds 0.06~7.04 mm/rev
    Range of cross feeds 0.03~3.52 mm/rev
    Main spindle motor 20HP (15kw) (25HP or 30HP option)
    Coolant pump motor 1/8 HP
    Rapid motor 1 HP
    N.W./G.W. (Kgs) FHK-960 12700/13600 | 13800/14800 | 14900/16000 14900/16000 | 16000/17200 | 17100/18400 18200/19600 | 19300/20800
    N.W./G.W. (Kgs) FHK-1120 13000/13900 | 14100/15100 | 15200/16300 15200/16300 | 16300/17500 | 17400/18700 18500/19900 | 19600/21100
    Machine size (LxWxH) 4740/ 5740/ 6740/ 7740/ 8740/ 9740/ 10740 x 2170 x 1510 mm (FHK-960) 4740/ 5740/ 6740/ 7740/ 8740/ 9740/ 10740 x 2170 x 1540 mm (FHK-1120)
    Shipping dimensions (LxWxH) 5100/ 6100/ 7100/ 8100/ 9100/ 10100/ 11100 x 2270 x 2300 mm
    End

    The post FHK series appeared first on Tech-NC.

    ]]>         HEAVY DUTY LATHE https://www.tech-nc.com/product/heavy-duty-lathe-2/ Wed, 02 Mar 2016 00:00:00 +0000 http://www.tech-nc.com/product/heavy-duty-lathe-2/
  • 1740
  • 1760
  • 1780
  • 2040
  • 2060
  • 2080

  • The post HEAVY DUTY LATHE appeared first on Tech-NC.

    ]]>     SPECIFCATIONS 1740 1760 1780 2040 2060 2080 NOMINAL SIZE Swing over Bed 440mm (17-5/16″) 510mm (20″) Swing over Cross Slide 272mm (10-3/4″) 342mm (13-1/2″) Height of Center 220mm (8-5/8″) 255mm (10″) Distance Between Centers 1000mm 1500mm 2000mm 1000mm 1500mm 2000mm BED Width of Bedways 330mm Total Length of Bed 2000mm 2510mm 3020mm 2000mm 2510mm 3020mm Swing over Gap 660mm 730mm Length of Gap 300mm Width in front of face plate 190mm 175mm SPINDLE Spindle nose mounting D1-8 Camlock Spindle bore 86mm Taper of spindle bore MT#5 Number of spindle speeds 12 steps Range of spindle speeds 20-1800 rpm TOOL SLIDE Total travel of cross slide 260mm Total travel of top slide 130mm Max. size cutting tool 25mm TAILSTOCK Total travel of tailstock barrel 150mm Taper in tailstock barrel MT#5 Diameter of barrel 65mm THREADS Lead screw diameter & pitch Dia.35mm Pitch 6mm 4 T.P.I Inch threads 2-72 TPI (48) Metric threads 0.2-14mm (48) Diametral pitches 8-60 D.P. (24) Module pitches 0.2-3.5 M.P. (24) FEEDS Feed rod diameter 25mm Range of longitudinal feeds 0.06~2 mm/rev. Range of cross feeds 0.03~0.8 mm/rev. MOTOR Main spindle motor 10HP Coolant pump motor 1/8HP WEIGHT Machine net weight 1900 kgs 2000 kgs 2200 kgs 2000 kgs 2100 kgs 2300 kgs End

    The post HEAVY DUTY LATHE appeared first on Tech-NC.

    ]]>         HEAVY DUTY LATHE https://www.tech-nc.com/product/heavy-duty-lathe/ Tue, 01 Mar 2016 00:00:00 +0000 http://www.tech-nc.com/product/heavy-duty-lathe/
  • 2480
  • 24120
  • 24160
  • 3080
  • 30120
  • 30160

    • The post HEAVY DUTY LATHE appeared first on Tech-NC.

    ]]>     SPECIFCATIONS 2480 24120 24160 3080 30120 30160 NOMINAL SIZE Swing over Bed 610mm (24″) 760mm (30″) Swing over Cross Slide 350mm (13-3/4″) 500mm (19-3/4″) Height of Center 305mm (12″) 380mm (15″) Distance Between Centers 2033mm 3050mm 4050mm 2033mm 3050mm 4050mm BED Width of Bedways 485mm Total Length of Bed 3320mm 4380mm 5470mm 3320mm 4380mm 5470mm Swing over Gap 820mm 970mm Length of Gap 515mm Width in front of face plate 340mm SPINDLE Spindle nose mounting D1-11 Camlock Spindle bore 105mm Taper of spindle bore MT#5 Number of spindle speeds 18 steps Range of spindle speeds 10-1200 rpm TOOL SLIDE Total travel of cross slide 375mm Total travel of top slide 225mm Max. size cutting tool 28mm TAILSTOCK Total travel of tailstock barrel 195mm Taper in tailstock barrel MT#5 Diameter of barrel 80mm THREADS Lead screw diameter & pitch Dia.38mm Pitch 12mm 2 T.P.I Inch threads 1/4-80 TPI (60) Metric threads 0.2-112mm (60) Diametral pitches 1-240 D.P. (55) Module pitches 0.05-28 M.P. (55) FEEDS Feed rod diameter 38mm Range of longitudinal feeds 0.04~5 mm/rev. (40) Range of cross feeds 0.015~4 mm/rev. (40) MOTOR Main spindle motor 15HP Coolant pump motor 1/8HP WEIGHT Machine net weight 3500 kgs 4000 kgs 4500 kgs 3800 kgs 4300 kgs 4800 kgs End

    The post HEAVY DUTY LATHE appeared first on Tech-NC.

    ]]>         Precision Engine Lathe https://www.tech-nc.com/product/precision-engine-lathe-4/ Mon, 29 Feb 2016 00:00:00 +0000 http://www.tech-nc.com/product/precision-engine-lathe-4/
  • FML-430x750
  • FML-430x1000
  • FML-430x1500
  • FML-430x2000
  • FML-500x1000
  • FML-500x1500

    • The post Precision Engine Lathe appeared first on Tech-NC.

    ]]>     SPECIFCATIONS FML-430×750 FML-430×1000 FML-430×1500 FML-430×2000 FML-500×1000 FML-500×1500 Swing over bed 430mm 500mm Swing over gap 660mm 730mm Centers Distance 700mm 1000mm 1500mm 1950mm 1000mm 1500mm Bed Width 300 mm Spindle Speed (50Hz) 42~1500rpm (12 speeds) INVERTER VARIABLE SPEED (3 Steps) 21~1833 rpm [ OPTION ] Spindle bore 58mm Spindle nose D1-6 (A1-6 option) Cross slide travel 220 mm 250 mm Metric pitches cutting 0.5~7mm/Pitch (22) Inch thread cutting 4~56TPI (36) Taper of tailstock MT4 Main drive motor 5HP 7.5HP Machine weight 1400kgs 1500kgs 1700kgs 1900kgs 1700kgs 1900kgs End

    The post Precision Engine Lathe appeared first on Tech-NC.

    ]]>         Precision Engine Lathe https://www.tech-nc.com/product/precision-engine-lathe/ Mon, 29 Feb 2016 00:00:00 +0000 http://www.tech-nc.com/product/precision-engine-lathe/
  • FM-1340
  • FM-1330
  • FM-1440
  • FM-1430

    • The post Precision Engine Lathe appeared first on Tech-NC.

    ]]>     SPECIFCATIONS FM-1340 FM-1330 FM-1440 FM-1430 Swing over bed 330mm (13”) 356mm (14”) Swing over cross slide 195mm 220mm Swing over gap 490mm 515mm Bed width 190mm Centers Distance 1000mm (40”) 750mm (30”) 1000mm (40”) 750mm (30”) Spindle speed 50~2000rpm (12) 50-2000rpm (12) Spindle bore 38mm Spindle nose D1-4 Camlock Cross slide Travel 165mm Taper of Spindle bore M.T.No.5 Metric thread 0.4~7mm (32) 0.4~7mm(32) 0.4-7mm(32) Inch thread 4-56 TPI (32) Motor 3HP 3 HP Machine weight 700 Kgs 650 Kgs 750 Kgs 700 Kgs Packing 1955x762x1448mm 1702x762x1448mm 1955x762x1474mm 1702x762x1474mm End

    The post Precision Engine Lathe appeared first on Tech-NC.

    ]]>         Variable-Speed Lathe https://www.tech-nc.com/product/variable-speed-lathe/ Mon, 29 Feb 2016 00:00:00 +0000 http://www.tech-nc.com/product/variable-speed-lathe/
  • FM-1224BV
  • FM-1236BV
  • FM-1340BV
  • FM-1340BV

    • The post Variable-Speed Lathe appeared first on Tech-NC.

    ]]>     SPECIFCATIONS FM-1224BV FM-1236BV FM-1340BV FM-1340BV Swing over bed 306mm 330mm Swing over cross slide 186mm 210mm Center Distance 610mm 915mm 1000mm Width of Bedways 190mm Swing over Gap 445mm 470mm Spindle nose D1-4 camlock Spindle bore & Taper 40mm ; MT 5 Spindle speed & range Variable speed change; 40 – 2000 R.P.M. Taper in tailstock MT 3 Range of Metric pitch 0.5 – 10mm (21) Number of Feed change 21 Main spindle motor 2 HP 3 HP Machine weight 500 kgs 550 kgs 600 kgs Packing size (mm) 1485x760x1530 1790x760x1530 1890x760x1550 End

    The post Variable-Speed Lathe appeared first on Tech-NC.

    ]]>         Table Lathe (metal) https://www.tech-nc.com/product/table-lathe-metal/ Mon, 29 Feb 2016 00:00:00 +0000 http://www.tech-nc.com/product/table-lathe-metal/
  • FMB-350

    • The post Table Lathe (metal) appeared first on Tech-NC.

    ]]>     SPECIFCATIONS FMB-350 Swing over bed 180mm Center distance 350mm Spindle speed 300~2900 rpm (Variable) Spindle bore 20 mm Max.Output 500W Bed width 83mm Spindle nose MT No.3 Cross slide travel 75mm Metric thread 0.25~1.5mm Inch thread 12~52 TPI Net weight 37 kgs End

    The post Table Lathe (metal) appeared first on Tech-NC.

    ]]>         Precision High Speed Lathe https://www.tech-nc.com/product/precision-high-speed-lathe/ Mon, 29 Feb 2016 00:00:00 +0000 http://www.tech-nc.com/product/precision-high-speed-lathe/
  • FM-560Lx1000 FM-560Lx1500 FM-560Lx2000 FM-560Lx2500 FM-560Lx3300 FM-560Lx4300
  • FM-660Lx1000 FM-660Lx1500 FM-660Lx2000 FM-660Lx2500 FM-660Lx3300 FM-660Lx4300
  • FM-760Lx1000 FM-760Lx1500 FM-760Lx2000 FM-760Lx2500 FM-760Lx3300 FM-760Lx4300

    • The post Precision High Speed Lathe appeared first on Tech-NC.

    ]]>     SPECIFCATIONS FM-560Lx1000 FM-560Lx1500 FM-560Lx2000 FM-560Lx2500 FM-560Lx3300 FM-560Lx4300 FM-660Lx1000 FM-660Lx1500 FM-660Lx2000 FM-660Lx2500 FM-660Lx3300 FM-660Lx4300 FM-760Lx1000 FM-760Lx1500 FM-760Lx2000 FM-760Lx2500 FM-760Lx3300 FM-760Lx4300 L SERIES: Bed width 400mm Swing over bed 560mm 660mm 760mm Swing over gap 788mm 890mm 990mm Centers Distance 1000mm,1500mm,2000mm,2500mm,3300mm,4300mm Bed Width 400mm (15 3/4″) Spindle Nose ASA D1-8 [ D1-11 OPT ] ASA D1-11 Spindle Bore 85mm [ 115mm OPT.) 115mm Taper of Spindle Bore MT7 Spindle Speeds 15~1500rpm(12 steps) [10~1000rpm 12 steps OPT] 10~1000rpm(12 steps) Inch Threads Range 2~56 TPI Metric Threads Range P0.5~P14 Taper of Tail Center MT5 Tail Spindle Travel 165mm Main Drive Motor 10HP 4P [ 15HP OPT.] 10HP 6P [ 15HP 6P OPT.] Gross Weight (kgs) 2300,2650,3050, 3300,3770,5030 2380,2730,3130, 3380,3850,5110 2460,2810,3210, 3460,3930,5190 End

    The post Precision High Speed Lathe appeared first on Tech-NC.

    ]]>         High Speed Heavy Duty Lathe https://www.tech-nc.com/product/high-speed-heavy-duty-lathe/ Mon, 29 Feb 2016 00:00:00 +0000 http://www.tech-nc.com/product/high-speed-heavy-duty-lathe/
  • FHG-660
  • FHG-760

    • The post High Speed Heavy Duty Lathe appeared first on Tech-NC.

    ]]>     SPECIFCATIONS FHG-660 FHG-760 x 1200 | x 1700 |x 2200 x 2200 | x 3200 | x 4200 Swing over Bed 660mm 760mm Swing over Cross Slide 410mm 510mm Distance between Centers 1200mm | 1700mm | 2200mm 2200mm | 3200mm | 4200mm Swing over Gap 930mm 1030mm Width of Bed 420mm Length of Bed 2400mm | 2900mm | 3400mm 3400mm | 4400mm | 5400mm Spindle Bore Diameter Ø80mm or [ Ø105mm (4.13”) Option ] Spindle Speeds & Steps 23 – 1300 rpm (12 steps) Spindle Nose ASA D1-8 (or A1-11 for spindle bore Ø105mm Option) Range of Metric Pitches 0.8~14mm (65 Nos) Range of Inch Pitches 2~28 T.P.I. (36 Nos) Main Spindle Motor 10HP (7.5kw) N.W./G.W. (Kgs) FHG-660 2500 / 2700 | 2700 /3000 | 2900 / 3200 2900 / 3200 | 3200 /3600 | 3700 /4000 N.W./G.W. (Kgs) FHG-760 2680 /2880 | 2880/ 3180 | 3080 /3380 3080 /3380 | 3480 /3780 | 3880/ 4180 End

    The post High Speed Heavy Duty Lathe appeared first on Tech-NC.

    ]]>         Precision High Speed Lathe https://www.tech-nc.com/product/precision-high-speed-lathe-4/ Mon, 29 Feb 2016 00:00:00 +0000 http://www.tech-nc.com/product/precision-high-speed-lathe-4/
  • FM-430Sx 560 FM-430Sx 760 FM-430Sx1000 FM-430Sx1500 FM-430Sx2200
  • FM-480Sx 560 FM-480Sx 760 FM-480Sx1000 FM-480Sx1500 FM-480Sx2200
  • FM-530Sx 560 FM-530Sx 760 FM-530Sx1000 FM-530Sx1500 FM-530Sx2200
  • FM-560Mx1000 FM-560Mx1500
  • FM-660Mx1000 FM-660Mx1500

    • The post Precision High Speed Lathe appeared first on Tech-NC.

    ]]>     SPECIFCATIONS FM-430Sx 560 FM-430Sx 760 FM-430Sx1000 FM-430Sx1500 FM-430Sx2200 FM-480Sx 560 FM-480Sx 760 FM-480Sx1000 FM-480Sx1500 FM-480Sx2200 FM-530Sx 560 FM-530Sx 760 FM-530Sx1000 FM-530Sx1500 FM-530Sx2200 FM-560Mx1000 FM-560Mx1500 FM-660Mx1000 FM-660Mx1500 S –Series: Bed width 300mm M-Series:Bed width 350mm Swing over bed 430mm (17″) 470mm 520mm 560mm 660mm Swing over gap 650mm 690mm 740mm 788mm 890mm Centers Distance 560mm,760mm,1000mm,1500mm,2200mm 1000mm,1500mm Spindle Nose ASA D1-6 [ D1-8 OPT.] ASA D1-8 Spindle Bore 58mm [ 78mm/3″ Opt.] 78mm 85mm Taper of Spindle Bore MT6 [ MT7 OPT] MT7 Spindle Speeds 20~2000rpm(12 steps) Spindle bore:58mm OPTION.[ 40~2000rpm(12 steps) Spindle bore:78mm] 15~1500rpm (12 steps) Inch Threads Range 4~56 TPI 2~56 TPI Metric Threads Range P0.5~P7 P0.5~P14 Taper of Tail Center MT4 MT5 Tail Spindle Travel 150mm 165mm Main Drive Motor 5HP [7.5HP Opt] 7.5 HP [10HP Opt. ] Gross Weight (kgs) 1600,1780,1860, 2200,2470 1640,1820,1900, 2225,2530 1680,1860,1910, 2285,2590 2350, 2550 2400, 2600 End

    The post Precision High Speed Lathe appeared first on Tech-NC.

    ]]>