Vertical Machining Center Archives - Tech-NC https://www.tech-nc.com/product-category/eumach/vertical-machining-center/ TECH NC .CO., LTD Sat, 11 May 2019 13:32:31 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.8 HSM-1175-1575 https://www.tech-nc.com/product/hsm-1175-1575/ Sat, 11 May 2019 13:32:30 +0000 https://www.tech-nc.com/?post_type=product&p=2419 C Frame/Linear way

The post HSM-1175-1575 appeared first on Tech-NC.

]]> Superior Designed Features

HSM-1175 : 1,100 x 750 x 650 (900) (mm) / HSM-1575 : 1,500 x 750 x 650 (900) (mm)

All roller guide ways are allowing a low friction and steady axis movement.

Specification

( ) Option
Model HSM-1175 HSM-1575
Table
Overall size ( MM ) 1,350 x 700 1,600 x 700
T slots ( size x No. x pitch ) ( MM ) 18 x 6 x 100 18 x 6 x 100
Max. loading ( kg ) 1,000 1,500
Travel
X axis ( mm ) 1,100 1,500
Y axis ( mm ) 750 750
Z axis ( mm ) 650 (900) 650 (900)
3 Axis Linear way
Linear way width ( mm ) 35 / 45 / 45 35 / 45 / 45
Distances
Spindle to column ways ( mm ) 831 831
Spindle to z axis cover ( mm ) 764 764
Spindle to table top ( mm ) 50 ~ 700 (950) 50 ~ 700 (950)
Floor to table top ( mm ) 999 999
Spindle
Taper #40 (HSK-A63) #40 (HSK-A63)
Speed ( RPM ) 8,000 (~30,000) 8,000 (~30,000)
Front bearing dia. ( mm ) 70 70
Motor ( kW ) 7.5 / 11 (~ 22 / 26)
Transmission 1:1 HTD belt ( direct coupling, motor spindle )
Axis motors
Axis motor torque ( Nm ) 12 / 12 / 22 22 / 22 / 22
Motor power ( kW ) 3 / 3 / 4 4 / 4 / 4
Rapid feed rate ( m ) 48 / 48 / 48 48 / 48 / 48
ATC swing arm
No. of tools 24 (32, 40, 60) 24 (32, 40, 60)
Max. tool diameter ( mm ) 125 125
Max. tool length ( mm ) 250 250
Ballscrews
Dia. x pitch ( X / Y / Z ) 45 / 40 / 40 x 16 45 / 40 / 40 x 16
Precision class ( C3 ) ( mm / 300 mm ) 0.008
Net weight
Net weight ( kg ) 8,500 11,000

Standard Accessories

  • Arm type tool changer system
  • Screw type chip quger & bucket
  • Full splash guard
  • Programmable coolant system
  • Automatic lubrication system
  • Spindle air blast system
  • Working lamp
  • Alarm lamp for abnormal situation
  • Indication lamp for dwell & end of job
  • Levelling bolts & pads
  • RS-232 terminal interface port
  • Machine & control manuals
  • Soznners & wernches
  • Spindle oil cooler device

The post HSM-1175-1575 appeared first on Tech-NC.

]]> HSM-1500 https://www.tech-nc.com/product/hsm-1500/ Sat, 11 May 2019 13:27:53 +0000 https://www.tech-nc.com/?post_type=product&p=2416 C Frame/Linear way

The post HSM-1500 appeared first on Tech-NC.

]]>

Superior Designed Features

HSM-1500 : 1,500 x 700 x 610(800) (mm)

All castings are being stress relieved and seasoning treated for long term accuracy & long service life.

Specification

( ) Option
Model HSM-1500
Table
Overall size ( mm ) 1,600 x 700
T slots ( size x No. x pitch ) ( mm ) 18 x 5 x 100
Max. loading ( kg ) 2,000
Travel
X axis ( mm ) 1,500
Y axis ( mm ) 700
Z axis ( mm ) 610 (800)
3 Axis Linear way
Linear way width ( mm ) 45 / 55 / 55
Distances
Spindle to column ways ( mm ) 758
Spindle to z axis cover ( mm ) 706
Spindle to table top ( mm ) 140 ~ 750
Floor to table top ( mm ) 1,008
Spindle
Taper #40 (50)
Speed ( RPM ) 8 ~ 30K (6 ~ 15K)
Front bearing dia. ( mm ) 70 (90)
Motor ( kW ) 7.5 / 11 (~ 22 / 26)
Transmission 1:1 HTD belt ( direct coupling, motor spindle )
Axis motors
Axis motor torque ( Nm ) 22 / 22 / 40
Motor power ( kW ) 4 / 4 / 6
Rapid feed rate ( m ) 48 / 48 / 36
ATC swing arm
No. of tools 24 (32, 40)
Max. tool diameter ( mm ) 125 (150)
Max. tool length ( mm ) 250 (300)
Ballscrews
Dia. x pitch ( X / Y / Z ) 50 / 50 / 50 x 16
Precision class ( C3 ) ( mm / 300 mm ) 0.008
Net weight
Net weight ( kg ) 12,000

Standard Accessories

  • Arm type tool changer system
  • Screw type chip quger & bucket
  • Full splash guard
  • Programmable coolant system
  • Automatic lubrication system
  • Spindle air blast system
  • Working lamp
  • Alarm lamp for abnormal situation
  • Indication lamp for dwell & end of job
  • Levelling bolts & pads
  • RS-232 terminal interface port
  • Machine & control manuals
  • Soznners & wernches
  • Spindle oil cooler device

The post HSM-1500 appeared first on Tech-NC.

]]> HSM-1350 https://www.tech-nc.com/product/hsm-1350/ Sat, 11 May 2019 13:24:02 +0000 https://www.tech-nc.com/?post_type=product&p=2413 C Frame/Linear way

The post HSM-1350 appeared first on Tech-NC.

]]> Superior Designed Features

HSM-1350 : 1,350 x 620 x 810 (mm)

Specification

( ) Option
Model HSM-1350
Table
Overall size ( mm ) 1,560 x 620
T slots ( size x No. x pitch ) ( mm ) 18 x 6 x 100
Max. loading ( kg ) 1,200
Travel
X axis ( mm ) 1,350
Y axis ( mm ) 620
Z axis ( mm ) 810
3 Axis Linear way
Linear way width ( mm ) 45 / 45 / 45
Distances
Spindle to column ways ( mm ) 710
Spindle to z axis cover ( mm ) 650
Spindle to table top ( mm ) 80 ~ 890
Floor to table top ( mm ) 868
Spindle
Taper #40 (HSK-A63)
Speed ( RPM ) 8,000 (~30,000)
Front bearing dia. ( mm ) 70
Motor ( kW ) 7.5 / 11 (~ 22 / 26)
Transmission 1:1 HTD belt ( direct coupling, motor spindle )
Axis motors
Axis motor torque ( Nm ) 22 / 22 / 22
Motor power ( kW ) 4 / 4 / 4
Rapid feed rate ( m ) 30 / 30 / 24
ATC swing arm
No. of tools 24 (32, 40, 60)
Max. tool diameter ( mm ) 125
Max. tool length ( mm ) 250
Ballscrews
Dia. x pitch ( X / Y / Z ) 45 / 40 / 50 x 12
Precision class ( C3 ) ( mm / 300 mm ) 0.008
Net weight
Net weight ( kg ) 9,800

Standard Accessories

  • Arm type tool changer system
  • Screw type chip quger & bucket
  • Full splash guard
  • Programmable coolant system
  • Automatic lubrication system
  • Spindle air blast system
  • Working lamp
  • Alarm lamp for abnormal situation
  • Indication lamp for dwell & end of job
  • Levelling bolts & pads
  • RS-232 terminal interface port
  • Machine & control manuals
  • Soznners & wernches
  • Spindle oil cooler device

The post HSM-1350 appeared first on Tech-NC.

]]> HSM-1000L https://www.tech-nc.com/product/hsm-1000l-2/ Sat, 11 May 2019 13:19:52 +0000 https://www.tech-nc.com/?post_type=product&p=2409 C Frame/Linear way

The post HSM-1000L appeared first on Tech-NC.

]]> Superior Designed Features

HSM-1000L : 1,100 x 610 x 610 (mm)

Specification

( ) Option
Model HSM-1000L
Table
Overall size ( mm ) 1,200 x 610
T slots ( size x No. x pitch ) ( mm ) 18 x 6 x 100
Max. loading ( kg ) 850
Travel
X axis ( mm ) 1,020
Y axis ( mm ) 610
Z axis ( mm ) 610
3 Axis Linear way
Linear way width ( mm ) 35 / 35 / 45
Distances
Spindle to column ways ( mm ) 705
Spindle to z axis cover ( mm ) 654
Spindle to table top ( mm ) 77 ~ 887
Floor to table top ( mm ) 820
Spindle
Taper #40 (HSK-A63)
Speed ( RPM ) 8,000 (~30,000)
Front bearing dia. ( mm ) 70
Motor ( kW ) 7.5 / 11 (~ 22 / 26)
Transmission 1:1 HTD belt ( direct coupling, motor spindle )
Axis motors
Axis motor torque ( Nm ) 12 / 12 / 22
Motor power ( kW ) 3 / 3 / 4
Rapid feed rate ( m ) 30 / 30 / 24
ATC swing arm
No. of tools 24 (32, 40, 60)
Max. tool diameter ( mm ) 125
Max. tool length ( mm ) 250
Ballscrews
Dia. x pitch ( X / Y / Z ) 45 / 40 / 50 x 12
Precision class ( C3 ) ( mm / 300 mm ) 0.008
Net weight
Net weight ( kg ) 7,000

Standard Accessories

  • Arm type tool changer system
  • Screw type chip quger & bucket
  • Full splash guard
  • Programmable coolant system
  • Automatic lubrication system
  • Spindle air blast system
  • Working lamp
  • Alarm lamp for abnormal situation
  • Indication lamp for dwell & end of job
  • Levelling bolts & pads
  • RS-232 terminal interface port
  • Machine & control manuals
  • Soznners & wernches
  • Spindle oil cooler device

The post HSM-1000L appeared first on Tech-NC.

]]> HSM-800 https://www.tech-nc.com/product/hsm-800/ Sat, 11 May 2019 13:10:06 +0000 https://www.tech-nc.com/?post_type=product&p=2406 C Frame/Linear way

The post HSM-800 appeared first on Tech-NC.

]]>

Superior Designed Features

HSM-800 : 800 x 510 x 610 (mm)

  • High quality casting made machine frame without any deformation.
  • High axis rapid feed rate up to 36 meter per minute.
  • Various spindle design to suit different applications 8,000 RPM ~ 30,000 RPM

Specification

( ) Option
Model HSM-800
Table
Overall size ( mm ) 870 x 500
T slots ( size x No. x pitch ) ( mm ) 18 x 3 x 100
Max. loading ( kg ) 500
Travel
X axis ( mm ) 800
Y axis ( mm ) 510
Z axis ( mm ) 610
3 Axis Linear way
Linear way width ( mm ) 35 / 35 / 45
Distances
Spindle to column ways ( mm ) 550
Spindle to z axis cover ( mm ) 510
Spindle to table top ( mm ) 110 ~ 720
Floor to table top ( mm ) 810
Spindle
Taper #40 (HSK-A63)
Speed ( RPM ) 8,000 (~30,000)
Front bearing dia. ( mm ) 70
Motor ( kW ) 7.5 / 11 (~ 22 / 26)
Transmission 1:1 HTD belt ( direct coupling, motor spindle )
Axis motors
Axis motor torque ( Nm ) 12 / 12 / 22
Motor power ( kW ) 3 / 3 / 4
Rapid feed rate ( M ) 30 / 30 / 24
ATC swing arm
No. of tools 24 (32, 40, 60)
Max. tool diameter ( mm ) 125
Max. tool length ( mm ) 250
Ballscrews
Dia. x pitch ( X / Y / Z ) 45 / 40 / 50 x 12
Precision class ( C3 ) ( mm / 300 mm ) 0.008
Net weight
Net weight ( kg ) 5,000

Standard Accessories

  • Arm type tool changer system
  • Screw type chip quger & bucket
  • Full splash guard
  • Programmable coolant system
  • Automatic lubrication system
  • Spindle air blast system
  • Working lamp
  • Alarm lamp for abnormal situation
  • Indication lamp for dwell & end of job
  • Levelling bolts & pads
  • RS-232 terminal interface port
  • Machine & control manuals
  • Soznners & wernches
  • Spindle oil cooler device

The post HSM-800 appeared first on Tech-NC.

]]> VMC-3200 https://www.tech-nc.com/product/vmc-3200/ Sat, 11 May 2019 13:04:36 +0000 https://www.tech-nc.com/?post_type=product&p=2402 Features

The post VMC-3200 appeared first on Tech-NC.

]]>

Features

  • Travel ( mm ) : 3,200 / 1,100 / 900
  • Spindle motor ( kW ) : 15 / 18.5 ~ 30 / 37
  • ATC : 24 ~ 40
  • Net weight ( kg ) : 24,000
  • 6 heavy duty box way in Y axis
  • Full guard & 40 ARM ATC are options.

Extra wide interior space


6 boxways base

Specification

( ) Option
Model VMC-3200
Table
Overall size ( mm ) 3,250 x 1,220
T slots ( size x No. x pitch ) ( mm ) 22 x 7 x 160
Max. loading ( kg ) 3,500
Travel
X / Y / Z axis ( opt. ) 3,200 / 1,100 / 900
Distances
Spindle to column ways ( mm ) 1,136
Spindle to table top ( mm ) 151 ~ 1,051 ( 186 ~ 1,086 )
Floor to table top ( mm ) 875
Spindle
Taper ( BT# ) 50 ( 40 )
Speed ( RPM ) 6,000 ( 10,000 )
Front bearing dia. ( mm ) 90
Motor ( kW ) 15 / 18.5 ~ 30 / 37
Axis motors: X / Y / Z
Power ( kW ) 4.8 / 7.4 / 4.8
Torque ( Nm ) 30 / 40 / 30
Feedrate: X / Y / Z
Cutting feedrate ( mm / min ) 1 ~ 8,000
Rapid feedrate X / Y / Z
Rapid ( m / min ) 15 / 15 / 15
Minmum setting 0.001
Automatic tool changer
Type of ATC ARM
No. of atc ( tools ) 24 ( 32, 40 )
Max. tool ( dia. / length ) ( mm ) 250 / 300
Max. tool weight ( kg ) 15
Tool to tool ( sec ) 10
Chip to chip 18
Ballscrews on 3 axis
Dia. x pitch ( mm x mm ) 63 / 63 / 63 x 10
Dia. x pitch ( Z axis ) ( mm x mm ) 50 x 10
Precision class ( C3 ) ( mm / 300 mm ) 0.008
Coolant & lubrication
Coolant motor power ( kW ) 0.86
Coolant tank volume ( L ) 350
Coolant motor capacity ( L / min ) 20
Lubrication motor power ( WATT ) 25 x 2
Lubrication tank volume ( L ) 4
Accuracy
Positioning ( Micron / mm ) ± 5/300
Repeatability ( Micron ) 3
Roundness ( mm ) 10 / 300
Miscellaneous
Net weight ( kg ) 24,000
Power required ( KVA ) 35
Pneumatic required ( kg / cm2) 7

Standard Accessories

  • table splash guard
  • 24 tools arm type ATC
  • Programmable coolant system
  • Automatic lubrication system
  • Spindle air blast system
  • Working lamp
  • Alarm lamp for abnormal situation
  • Indication lamp for dwell & end of job
  • Levelling bolts & pads
  • BT#50 spindle & ATC, HTD belt head
  • Pre-extensioned ballscrews
  • RS-232 terminal interface port
  • Machine & control manuals
  • Toolbox with spanners & wrenches
  • Screw chip conveyor rear side of saddle

The post VMC-3200 appeared first on Tech-NC.

]]> VMC-2600 https://www.tech-nc.com/product/vmc-2600/ Sat, 11 May 2019 12:50:57 +0000 https://www.tech-nc.com/?post_type=product&p=2399 C Frame/Box way

The post VMC-2600 appeared first on Tech-NC.

]]>

Features

  • Travel ( mm ) : 2,600 / 1,100 / 900
  • Spindle motor ( kW ) : 15 / 18.5 ~ 30 / 37
  • ATC : 24 ~ 40
  • Net weight ( kg ) : 22,000
  • 6 heavy duty box way in Y axis
  • Full guard & 40 ARM ATC are options.

Standard table splash guard

  • Column
    The oversized box type column 908 mm ( L ) x 1,100 mm ( W ) x 2,450 mm ( H ). the best support at spindle head heavy cutting and column stiffness.
  • Table
    Standard 2,650 mm x 1,220 mm extra wide working table handles big heavy workpiece.
  • Saddle
    4.9 meters length super heavy saddle, guaranteed no table overhang for table movement.

Specification

( ) Option
Model VMC-2600
Table
Overall size ( mm ) 2,650 x 1,220
T slots ( size x No. x pitch ) ( mm ) 22 x 7 x 160
Max. loading ( kg ) 3,000
Travel
X / Y / Z axis ( opt. ) 2,600 / 1,100 / 900
Distances
Spindle to column ways ( mm ) 1,136
Spindle to table top ( mm ) 151 ~ 1,051 ( 186 ~ 1,086 )
Floor to table top ( mm ) 875
Spindle
Taper ( BT# ) 50 ( 40 )
Speed ( RPM ) 6,000 ( 10,000 )
Front bearing dia. ( mm ) 90
Motor ( kW ) 15 / 18.5 ~ 30 / 37
Axis motors: X / Y / Z
Power ( kW ) 4.8 / 7.4 / 4.8
Torque ( Nm ) 30 / 40 / 30
Feedrate: X / Y / Z
Cutting feedrate ( mm / Min. ) 1 ~ 8,000
Rapid feedrate X / Y / Z
Rapid ( M / Min. ) 15 / 15 / 15
Minmum setting 0.001
Automatic tool changer
Type of atc ARM
No. of atc ( tools ) 24 ( 32, 40 )
Max. tool ( dia. / length ) ( mm ) 250 / 300
Max. tool weight ( kg ) 15
Tool to tool ( SEC ) 10
Chip to chip 18
Ballscrews on 3 axis
Dia. x pitch ( mm x mm ) 63 / 63 / 63 x 10
Dia. x pitch ( Z axis ) ( mm x mm ) 50 x 10
Precision class ( C3 ) ( mm / 300 mm ) 0.008
Coolant & lubrication
Coolant motor power ( kW ) 0.86
Coolant tank volume ( L ) 350
Coolant motor capacity ( L / min ) 20
Lubrication motor power ( WATT ) 25 x 2
Lubrication tank volume ( L ) 4
Accuracy
Positioning ( Micron / mm ) ± 5/300
Repeatability ( Micron ) 3
Roundness ( mm ) 10 / 300
Miscellaneous
Net weight ( kg ) 22,000
Power required ( KVA ) 35
Pneumatic required ( kg / cm2) 7

Standard Accessories

  • table splash guard
  • 24 tools arm type ATC
  • Programmable coolant system
  • Automatic lubrication system
  • Spindle air blast system
  • Working lamp
  • Alarm lamp for abnormal situation
  • Indication lamp for dwell & end of job
  • Levelling bolts & pads
  • BT#50 spindle & ATC, HTD belt head
  • Pre-extensioned ballscrews
  • RS-232 terminal interface port
  • Machine & control manuals
  • Toolbox with spanners & wrenches
  • Screw chip conveyor rear side of saddle

The post VMC-2600 appeared first on Tech-NC.

]]> VMC-2150 https://www.tech-nc.com/product/vmc-2150/ Sat, 11 May 2019 12:45:04 +0000 https://www.tech-nc.com/?post_type=product&p=2396 C Frame/Box way

The post VMC-2150 appeared first on Tech-NC.

]]>

Features

  • Travel ( mm ) : 2,150 / 1,100 / 900
  • Spindle motor ( kW ) : 15 / 18.5 ~ 30 / 37
  • ATC : 24 ~ 40
  • Net weight ( kg ) : 21,000
  • Full guard & rotary table are options
  • Column
    The oversized box type column 908 mm ( L ) x 1,100 mm ( W ) x 2,450 mm ( H ). the best support at spindle head heavy cutting and column stiffness.
  • Saddle
    4 meters length super heavy saddle, guaranteed no table overhang for table movement.
  • Table
    Standard 2,200 mm x 1,220 mm extra wide working table handles big heavy workpiece.

Specification

( ) Option
Model VMC-2150
Table
Overall size ( mm ) 2,200 x 1,220
T slots ( size x No. x pitch ) ( mm ) 22 x 7 x 160
Max. loading ( kg ) 2,500
Travel
X / Y / Z axis ( opt. ) 2,150 / 1,100 / 900
Distances
Spindle to column ways ( mm ) 1,136
Spindle to table top ( mm ) 151 ~ 1,051 ( 186 ~ 1,086 )
Floor to table top ( mm ) 875
Spindle
Taper ( BT# ) 50 ( 40 )
Speed ( RPM ) 6,000 ( 10,000 )
Front bearing dia. ( mm ) 90
Motor ( kW ) 15 / 18.5 ~ 30 / 37
Axis motors: X / Y / Z
Power ( kW ) 4.8 / 7.4 / 4.8
Torque ( Nm ) 30 / 40 / 30
Feedrate: X / Y / Z
Cutting feedrate ( mm / min ) 1 ~ 8000
Rapid feedrate X / Y / Z
Rapid ( m / min ) 15 / 15 / 15
Minmum setting 0.001
Automatic tool changer
Type of ATC ARM
No. of atc ( tools ) 24 ( 32, 40 )
Max. tool ( dia. / length ) ( mm ) 250 / 300
Max. tool weight ( kg ) 15
Tool to tool ( SEC ) 10
Chip to chip 18
Ballscrews on 3 axis
Dia. x pitch ( mm x mm ) 63 / 63 / 63 x 10
Dia. x pitch ( Z axis ) ( mm x mm ) 50 x 10
Precision class ( C3 ) ( mm / 300 mm ) 0.008
Coolant & lubrication
Coolant motor power ( kW ) 0.86
Coolant tank volume ( L ) 350
Coolant motor capacity ( L / min ) 20
Lubrication motor power ( WATT ) 25 x 2
Lubrication tank volume ( L ) 4
Accuracy
Positioning ( Micron / mm ) ± 5/300
Repeatability ( Micron ) 3
Roundness ( mm ) 10 / 300
Miscellaneous
Net weight ( kg ) 21,000
Power required ( KVA ) 35
Pneumatic required ( kg / cm2) 7

The post VMC-2150 appeared first on Tech-NC.

]]> VMC-1400 https://www.tech-nc.com/product/vmc-1400/ Sat, 11 May 2019 12:38:47 +0000 https://www.tech-nc.com/?post_type=product&p=2393 C Frame/Box way

The post VMC-1400 appeared first on Tech-NC.

]]>

Vertical Machining

The Eumach medium sized, #50 taper spindle machines, heavy cutting up to 700 c.c. / Min. on steel S45C. ( withe some options )

VMC-1400: 1,400 mm x 700 mm x 760 mm

  • All castings are stress relieved and seasoning treated for long term accuracy and long service life.
  • 3-Axis by using box type sideway achieve heavy machiningb ability and overall, a structure of outstanding stability. All slideways are hardened, precision ground and coated with TURCITE-B and sophisticate hand-scraping allowing a low friction and steaby movement Y-axis with 4 guideway box type sideway, X axis travers with full support.

Specification

( ) Option
Model VMC-1400
Table
Overall size ( mm ) 1,500 x 710
Working area ( mm ) 1,500 x 710
T slots ( size x No. x pitch ) ( mm ) 18 x 6 x 125
Max. loading ( kg ) 1,500
Travel
X / Y / Z axis ( mm ) 1,400 / 700 / 760
Distances
Spindle to column ways ( mm ) 760
Spindle to table top ( mm ) 125 ~ 885
Floor to table top ( mm ) 850
Spindle
Taper ( BT# ) 50
Speed ( RPM ) 6,000
Front bearing dia. ( mm ) 90
Motor ( kW ) 15
Axis motors: X & Y & Z
Heidenhain / Siemens / Selca ( Nm ) 20
Cutting federate ( mm / min ) 1 ~ 8,000
Rapid federate X / Y / Z ( m / min ) 15 / 15 / 12
Minmum setting ( mm ) 0.001
Automatic tool changer
Type of atc Carrousel
No. of atc ( tools ) 20
Max. tool ( dia. / length ) ( mm ) 125 / 300
Max. tool weight ( kg ) 15
Tool to tool (sec) 10
Chip to chip (sec) 20
Ballscrews on 3 axis
Dia. x pitch ( X & Y axis ) ( mm x mm ) 45 x 10
Dia. x pitch ( Z axis ) ( mm x mm ) 50 x 10
Precision class ( C3 ) ( mm / 300 mm ) 0.008
Coolant & lubrication
Coolant motor power ( kW ) 0.86
Coolant tank volume ( L ) 120
Coolant motor capacity ( L / min ) 20
Lubrication motor power ( WATT ) 15
Lubrication tank volume ( L ) 2
Accuracy
Positioning ( mm ) JIS 6338 : ± 0.005 / 300, VDI 3441 : P0.014
Repeatability ( mm ) JIS 6338 : ± 0.003, VDI 3441 : PS0.01
Roundness ( mm ) JIS6338：± 0.01 / 300 Dia.
Miscellaneous
Net weight ( kg ) 13,000
Power required ( KVA ) 25
Pneumatic required ( kg / cm2) 7

The post VMC-1400 appeared first on Tech-NC.

]]> VMC-1600 https://www.tech-nc.com/product/vmc-1600/ Sat, 11 May 2019 00:32:15 +0000 https://www.tech-nc.com/?post_type=product&p=2360 C Frame/Box way

The post VMC-1600 appeared first on Tech-NC.

]]>

Vertical Machining

Rigid meehanite casting frames without deformation

Extra wide interior space

  • 1,600 mm / 815 mm / 700 mm travel
  • 15 kW high torque spindle
  • 1,700 mm x 815 mm table
  • Standard 20 tools arm ATC
  • 15,000 kgs weight
  • Full guard is an option

Extra wide interior space. ( unit : mm )

AStandard 24 tools arm ATC
The head, column, table, saddle and base are made from quality cast iron and stress released.
The 4 slideways design machine base is for heavy duty cutting. all slideways have been hardened & ground.

Guaranteed accuracy

JIS B 6338 VDI 3441
Positioning ( mm ) ± 0.005 / 300 P 0.014
Repeatability ( mm ) ± 0.003 PS 0.01

Specification

( ) Option
Model VMC-1600
Table
Overall size ( mm ) 1,700 x 815
Working area ( mm ) 1,700 x 815
T slots ( size x No. x pitch ) ( mm ) 18 x 5 x 150
Max. loading ( kg ) 2,000
Travel
X / Y / Z axis ( mm ) 1,600 / 815 / 700
Distances
Spindle to column ways ( mm ) 855
Spindle to table top ( mm ) 200 ~ 900
Floor to table top ( mm ) 850
Spindle
Taper ( BT# ) 50 ( 40 )
Speed ( RPM ) 6,000
Front bearing dia. ( mm ) 90
Motor ( kW ) 11 / 15
Axis motors: X & Y & Z
Servo motor ( kW ) 3.7
Cutting federate ( mm / Min. ) 1 ~ 8,000
Rapid federate X / Y / Z ( M / Min. ) 10 / 10 / 10
Automatic tool changer
Type of ATC ARM
No. of ATC ( tools ) 20 ( 32 / 40 )
Max. tool ( dia. / length ) ( mm ) 125 / 400
Max. tool weight ( kg ) 15
Tool to tool (sec.) 3.5
Chip to chip (sec.) 10
Ballscrews on 3 axis
Dia. x pitch ( X & Y & Z axis ) ( mm x mm ) 50 x 10
Precision class ( C3 ) ( mm / 300 mm ) 0.008
Miscellaneous
Net weight ( kg ) 15,000
Power required ( KVA ) 30
Pneumatic required ( kg / cm2) 7

The post VMC-1600 appeared first on Tech-NC.

]]>